1. If the machine is turned on normally, there must be various drying equipment on the production line, but each equipment has different characteristics, so we cannot slack off at all when operating the dryer. Therefore, when using an air source heat pump dryer, an idling test must be performed first to ensure that no abnormalities occur during the production and processing of the equipment.

  2. No matter what kind of heat pump dryer it is, it should be equipped with the manufacturer's operating instructions. When we use the air energy heat pump dryer, we should be proficient in operating the parameters of the equipment and the targeted requirements of the materials, and strictly control the particle size of the feed. and purity to prevent the drying effect from being unsafe and causing harm to the equipment.

  3. In the process of using air energy heat pump dryers to process materials, the humidity ratio of the input materials and the efficiency of the dryer must be calculated to prevent excessive intake of wet materials and unstable output. It is also necessary to control the humidity of the materials. Quantity to prevent large amounts of feed from causing equipment wear.

  4. The heat pump dryer should undergo basic inspections every day to check whether there are any abnormalities in the unit. If there are any abnormalities, they need to be eliminated before starting operation; not only should these be checked every day, but also whether the pressure gauge is zero, whether the valve is leaking, and whether the ventilation is good. , whether the operating pressure is within the normal range, etc. These aspects need to be checked every day. The detection of air source heat pump units is a necessary form to extend the service life of the unit.

  5. The use of the heat pump dryer requires a certain foundation. First, read the instructions carefully, master the basic usage methods, use it according to the operating procedures, check, adjust and maintain it regularly, and deal with problems in time if any problems are found.

  6. Do not pile up debris around the heat pump dryer to avoid clogging the air inlet and outlet. Keep it clean and well ventilated. If it is not used for a long time, turn off the power and clean the unit. No matter what brand of air source heat pump dryer a user buys, if it is used for a long time, it will wear out. Therefore, do not underestimate the maintenance of the unit. Routine maintenance can extend the service life of the unit to a certain extent.

• Prev: Will there be uneven drying when drying dried mangoes?
• Next: Drying process reference for fungus dryer