Focus on heavy equipment
Focus on heavy equipment
The garlic drying machine also called garlic belt dryer, it is continuous type drying system, the good choice drying machine for large scale chili drying production. It can process 2 tons to 20 tons of garlic flakes every day. The whole drying process is clean and hygienic. With intelligent control, it can control the temperature, duration and air volume during drying. So that the garlic flakes is always in a suitable drying environment to ensure the garlic flakes drying effect.
The garlic flakes drying machine utilize the hot air produced by the heat furnace as the drying medium. The heat is blown into the air duct through a low-noise high-pressure fan and is introduced into the box to form a hot air cycle, the temperature is very uniform. It has the characteristics of automatic temperature control, speed regulation, fault alarm, etc., and it is safe to use, convenient, environmentally friendly, and energy-saving..
It has the advantage of fast drying speed, high evaporation intensity, high production efficiencyand best product quality. The running speed, drying temperature and humidity can be adjusted to meet the different chili condition and drying requirement.
Garlic drying machine can efficiently and quickly dry garlic with high quality. During the drying process, the chili will be completely dried without changing color, aroma, and nutritional content, which can make the garlic have higher commercial value.
Materials are uniformly put on the mesh-belt by the feeder. The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device. The drier is composed of several units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring the material water away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material temperature. The final products after drying will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the users’ demand. The unit number can be selected according to the demand.
DW series multi-layer belt dryer is a continuous drying equipment for batch production. It is suitable for large-scale production of difficult-to-dry materials with low drying rate. The equipment has compact structure, small floor area, simple operation, convenient maintenance and stable operation.
| Model | DW-5-1.2-8 | DW-5-1.2-10 | DW-5-1.6-8 | DW-5-1.6-10 | DW-5-2-8 | DW-5-2-10 | |
| Width of belt(m) | 1.2 | 1.6 | 2 | ||||
| Length of dry section(m) | 8 | 10 | 8 | 10 | 8 | 10 | |
| Thickness of raw material spreading(mm) | 10-50 | ||||||
| Operation temperature(℃) | 50-120 | ||||||
| Steam pressure(MPa) | 0.2-0.5 | ||||||
| Steam consumption(kg/h) | ≤2Kg steam/evaporating 1kg water (for vegetables and herbal pieces) | ||||||
| Drying capacity(kg water/h) | 100-250 | 120-350 | 110-320 | 140-320 | 150-450 | 200-550 | |
| Total power(kw) | 21.2 | 22.7 | |||||
| Overall dimensions | L(m) | 11 | 12.5 | 11 | 12.5 | 11 | 12.5 |
| W(m) | 1.6 | 1.6 | 2.0 | 2.0 | 2.4 | 2.4 | |
| H(m) | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | 2.7 | |
| Weight(kg) | 3800 | 4780 | 4400 | 5550 | 5350 | 6800 | |
| Note: Multi-layer mesh belt dryers are available in 3, 5, 7 and 9 layers. | |||||||
Location: PakistanCapacity: 3 t/h
Location: IndiaCapacity: 4 t/h
Location: IndiaCapacity: 2 t/h
